Intel System Board G4H875-N - Manual (Page 46)

46
2
Hardware Installation
2 1 ON
2.6.3 S/PDIF Connector
"
The S/PDIF connector (J5) is used to connect external S/PDIF
por ts. The S/PDIF ports may be mounted on a card-edge bracket.
Install the card-edge bracket to the system chassis then connect
the audio cable connector to J5. Make sure pin 1 of the audio
cable connector is aligned with pin 1 of J5.
1 5
+5V
Key
SPDIF out
GND
SPDIF in