Intel System Board G4H875-N - Manual (Page 48)

48
2
Hardware Installation
2 1 ON
2.6.5 Serial ATA Connectors
Connect one end of the SATA cable to J22 (SATA 2) or J23
(SATA 1) and the other end to your serial ATA device.
BIOS Setting
Configure the Serial ATA drives in the Integrated Peripherals
submenu (“OnChip IDE Device” section) of the BIOS. Refer to
chapter 3 for more information.
!
SATA 2
SATA 1
GND
TXP TXN GND RXN RXP GND
1 7
1 7