Ikelite 6146.10 User Manual

Ikelite digital housing, Front view, Back view

Advertising
background image

Congratulations on your purchase of an Ikelite Digital Camera

Housing. Ikelite has over 45 years of experience in the underwater

photographic and lighting market. Our products are designed and

built in the USA by Ikelite for both the professional and amateur

photographer.

The clear housing permits instant visual inspection of the camera

and all sealing surfaces as well as complete monitoring of controls

and camera LCD screens.

Ikelite Digital Housings are slightly negative in salt water for

stability. This housing has been water pressure tested at the

factory to 200’ (60m).

Ikelite Digital Housing

i n s t r u c t i o n m a n u a l

#

#66114466..1100 ffoorr CCaannoonn PPoow

weerrSShhoott GG1100

#

#66114466..1111 ffoorr CCaannoonn PPoow

weerrsshhoott GG1111

2

PPlleeaassee RReeaadd

We suggest that you read this instruction booklet thoroughly

before use. If you are new to underwater photography, be sure

to read the General and Photo Tips sections.

We also suggest that you read your camera manual thoroughly

to have a full understanding of each camera function.

IInniittiiaall CCaam

meerraa SSeettuupp

1. Set ISO to 80.

2. Set camera mode dial to “Av” Aperture priority. In Aperture

Priority mode "Av" the shutter speed should automatically go to

1/60 second.

3. Set Flash to “On” (lightning bolt in LCD).

4. For General photography, set aperture to f3.5.

5. For Macro photography, set aperture to f8.0.

6. Set White Balance (AWB) to “Auto”.

7. Set Image Size to “L” and compression to “S” Superfine.

8. Set Metering to “Center-Weighted Avg.”.

9. In the camera menu set the “ND” Filter to “Cancel”.

N

NO

OTTEESS::

- TTL Flash NOT available when camera is in “M” Manual mode.

There is no TTL flash even with Canon's own flash in the camera

"M" mode. Manual power settings can be selected with the

multi-control button on the back of the camera. The strobe

should still be left in TTL to take advantage of this feature.

- Leave the housing hotshoe disconnected when using an EV

manual controller. If using an EV controller in “M” Manual

mode, set the EV controller to “non-Pre-flash”.

- When multiple exposure (continuous shooting) mode is used,

the external flash will not fire. This is normal and also happens

with Canon external speedlights.

Front View

Shutter
Release

Lid
Snap

Lid
Snap

Lens
Port

Zoom Dial

Mode
Dial

Shortcut

Exp. Comp. Dial

Lens Port

3

Back View

Power

Button

[E] Manual Focus
[F] Control Dial
[G] Macro
[H] FUNC./SET

[I] Flash
[J] Self-Timer
[K] Display
[L] Menu

[A] Playback
[B] AE/FE Lock
[C] Single Erase
[D] Metering Light

A

B

C

D

E

F

G H

J

K

I

L

TTL Connector

ISO Dial

O

Oppeenniinngg tthhee H

Hoouussiinngg

1. Lid Snaps have a LLoocckk.

To open, push Lid Snap

Lock forward and lift as

shown. Keep pressure

on the Lid Snap so it

does not fly open

quickly.

Some lid snaps have a

lot of spring tension once they go over center, so keep a firm

grip on the lid snap. Lid Snaps may be opened one at a time.

Lift

Push Forward

Lid Snap Lock

4

H

Hoouussiinngg LLeennss PPoorrtt aanndd AAcccceessssoorryy LLeennsseess

Treat the glass in the lens port as a camera lens. After use, rinse

and gently dry the lens port to avoid water spotting. To clean,

use a mild soap solution or lens cleaner.

Do not use alcohol or window cleaner on the Lens Port.

SSeeee PPaaggee #

#1199 ffoorr aacccceessssoorryy lleennss iinnffoorrm

maattiioonn..

Advertising
This manual is related to the following products: