Ikelite 6146.10 - Manual (Page 5)

17 18
D Diiggiittaall 66114466..1100__66114466..1111--0033--00881100
PPhhoottoo TTiippss
1. The number one rule in underwater photography is eliminate
as much water between camera and subject as possible. Get
as close as you can to the subject, then use the zoom. If you
are using flash, subjects beyond 6 feet (1.8m)will not have
much color.
2. The camera’s built-in flash is very close to the camera lens. The
flash can light up any suspended particles in the water and they
can be recorded in your picture. This effect is called backscatter.
To eliminate as much backscatter as possible, photograph close.
Photograph in clear water; do not stir up the sand or silty
bottom. If backscatter becomes a problem in the environment
you are photographing, an external flash will help eliminate
much of the backscatter.
3. Many digital cameras have a slight lag time between when you
press the shutter release button and the camera actually takes
the picture. Hold the camera steady a second or two after
pressing the shutter release button.
4. Do not shoot down on subjects as they will quite often blend
into the background and be difficult to see in the photograph.
Shoot subjects straight on or shoot up at a slight angle using
the blue water as a contrasting background.
5. Underwater flash is used to restore the warmer colors filtered
out by the water as well as to illuminate the subject. When
photographing underwater, set the camera to use flash on
every shot. If the camera’s flash is set to AUTO and the sun is
behind your subject, the camera may see enough light and not
fire the flash. With the sun behind the subject, the subject is
shaded (dark) and needs flash for a good exposure.
6. When using daylight or flash, if your camera consistently over
or underexposes the image, you may want to adjust your
camera’s exposure compensation settings.
GGeenneerraall TTiippss
1. Due to the power required to operate the camera, flash, and
LCD screen, it is a good idea to start each dive with a fresh set
of batteries.
2. Some cameras reset their flash to AUTO when the camera is
turned on. If you prefer another setting be sure to select it.
3. As soon as you enter the water, take a moment and check the
housing to see that it is properly sealed.
4. Next, check to see if there are any bubbles on the face of the
lens port. If there are, take your finger and remove them. If
there are bubbles on the lens port they can produce soft focus
spots in your photographs.
5. If you are shooting with the camera’s built-in flash and the
camera lens is set to the widest angle, you may need to zoom
the lens slightly or a shadow may appear in the lower left
corner of close-up photographs. The lens port may block some
of the light. Installing the flash diffuser will help to eliminate
the shadow. (You can test this above water)
N NO OTTEE:: To shoot photographs closer than 2 feet (0.6m), you should
use an external strobe such as the DS51 or DS161. With an
external strobe, you can position it so nothing blocks the light
path between the strobe and the subject.
housing
lubricate shaft
pull out to
expose shaft
Diagram B
PPhhoottoo TTiippss CCoonntt..
7. Image manipulation programs can often correct underexposed
images. Overexposed images result in missing color information
which cannot be corrected. If exposure error occurs, it is better
to have the image slightly underexposed.
19
O Oppttiioonnaall AAcccceessssoorriieess
BBaacckk oo--rriinngg
# #00111100
Carry a spare o-ring in case the original becomes damaged or lost.
TTrraayy w wiitthh D Duuaall RReelleeaassee H Haannddlleess # #99552233..3322
Required to mount two external Substrobes.
W WD D--44 W Wiiddee--AAnnggllee CCoonnvveerrssiioonn D Doom mee
# #66443300..44
The removeable WD-4 corrects light refraction underwater,
restoring the camera’s original 28mm angle of coverage.
Approximately 3/4 of the camera's zoom range can be used with
the dome in place. Additional information is linked from the G10
web page at www.ikelite.com.
EExxtteerrnnaall M Maaccrroo AAddaappttoorr # #99330066..8822
Allows attachment of 67mm threaded macro lenses from Inon and
Epoque. NOT for use with 67mm threaded wide-angle lenses.
N NO OTTEE:: O Otthheerr AAcccceessssoorryy aanndd W Wiiddee--AAnnggllee CCoonnvveerrssiioonn
l leennsseess ccaannnnoott bbee uusseedd w wiitthh tthhiiss hhoouussiinngg..
IIkkeelliittee LLiim miitteedd W Waarrrraannttyy
All Ikelite products are warranted against any manufacturing
defects for a period of one year from the original date of purchase.
Defective products should be returned prepaid to Ikelite. Ikelite
will, at its discretion, repair or replace such products, and will
return to customer prepaid. All other claims of any nature are not
covered. Housing is pressure tested and warranted to 200’ (60m)
maximum underwater depth. Except as mentioned above, no other
warranty expressed or implied, applies to this Ikelite product.
H Hoow w ttoo ccoonnttaacctt IIkkeelliittee iiff nneecceessssaarryy
E-mail: [email protected]
Phone 317.923.4523
Fax 317.924.7988
RReettuurrnniinngg PPrroodduuccttss ffoorr SSeerrvviiccee
((oouuttssiiddee tthhee U Unniitteedd SSttaatteess))
For the separate international customs documentation form that
you complete to accompany the shipment, please state or
designate that the enclosed products were originally manufactured
in the USA and are being returned to the manufacturer for repair
service. Value of the equipment listed for customs purposes should
be zero.
RReettuurrnniinngg PPrroodduuccttss ffoorr SSeerrvviiccee
Ikelite is most interested in performing any service to ensure that
all products perform as intended. Evidence of purchase date must
be provided to obtain warranty service.
No prior authorization is required. You may return directly to us or
through your dealer. Please include a brief description of the
problem, any relevant e-mail correspondence, and/or instructions
on what you want us to do. Always include name, shipping address,
e-mail address, and phone number inside of the package.
You may also want to insure the package. No reimbursements for
return freight will be issued. Send Postage Pre-Paid to:
Ikelite Underwater Systems
ATTN: Repair Dept.
50 West 33 Street
Indianapolis, IN 46208 USA
IIkkeelliittee U Unnddeerrw waatteerr SSyysstteem mss
5500 W Weesstt 3333rrdd SSttrreeeett
IInnddiiaannaappoolliiss,, IIN N 4466220088 U USSAA