iLive IH328B - Manual (Page 7)

7
Playing a CD
1. Press the Standby Button to turn the unit on.
. Press the Open/Close Button to open the CD/iPod door.
3. Load a CD into the CD player. Press the Open/Close Button to close the CD/iPod
door.
Always load the CD into the left opening first. A second CD should only be loaded
into the CD opening on the right.
4. Press the Function Button to switch the unit to CD mode.
5. Press the Disc Select Button to switch between CD 1 and CD .
6. Press the Play/Pause/Mem Up Button to pause the selected CD.
Programming a CD
1. With a CD loaded and playing, press the Stop/Band Button.
. Press the Mem/Clk Adj Button.
3. Press the Skip/Search/Tune Buttons to select a CD track to be programmed.
4. Press the Mem/Clk Adj Button to set the selected track to the next available
program slot.
5. Repeat steps 3 through 4 until the desired tracks are programmed.
6. Press the Play/Pause/Mem Up Button to begin playing the programmed tracks.