Ironman Fitness Viper - Manual (Page 9)

9
Assembly
N10
A9
Figure 5
Step 1:
Slide the seat adjustment handlebar (A11)
into the main frame and secure using stop-
ping screw (N10).
Step 2:
Connect sensor wire (A32) to sensor wire
(J1) and side handlebar (J-R) onto sliding
track (A9). Secure using three bolts (N7).
Figure 5
N3
A9
Figure 6
Step 1:
Connect sensor wires (A32) to sensor wire
(J1) and side handlebar (J-L) onto sliding
track (A9). Secure using three bolts (N7).
Step 2:
Locate seat pad (G) and secure onto slid-
ing track (A9) with four screws (N1) and
four washers (N3).
Figure 6