Internal pci/ide (both), Ide dma transfer access (enabled), Ide burst mode (enabled) – Intel SG-81 User Manual
Page 39: Onchip sata controller (enabled)
BIOS Setup
3-15
Internal PCI/IDE (Both)
Use these items to enable or disable the internal PCI IDE channels that are integrated
on the mainboard.
IDE DMA Transfer Access (Enabled)
This item allows you to enabled the transfer access of the IDE DMA.
IDE Burst Mode (Enabled)
This option, when enabled will instruct the system to send every write transaction to
the write buffer. Burstable transactions then burst onto the PCI bus and nonburstable
transactions do not.
OnChip SATA Controller (Enabled)
Enables or disables the onboard Serial ATA controller. Enable this item if you are to
install SATA devices onboard.
Serial ATA Mode (IDE)
Use this item to define the onboard SATA mode. Set this item to RAID if you are to
activate the RAID function of the SATA devices.
Press <Esc> to return to the Integrated Peripherals screen.
User’s Manual