Icom IC-7700 User Manual
Page 205
16-4
■
Firmware update— USB-Memory
When updating the firmware with the USB-Memory, no
IP address or subnet mask settings are necessary.
q
Copy the downloaded firmware data into the USB-
Memory (“IC-7700” folder).
• The USB-Memory must have been formatted by the IC-
7700.
w
Insert the USB-Memory into the USB connector.
e
Push
several times to close a multi-func-
tion screen, if necessary.
r
Push [F-7•SET] to select set mode menu screen.
t
Push [F-7•USB] to select USB-Memory set menu.
y
Push and hold [F-3•FIRM UP] for 1 sec.
u
Read the displayed precaution carefully.
• Push [F-1•
Y
] or [F-2•
Z
] to scroll the indication.
• Push [F-7•CANCEL] to cancel the firmware updating.
i
After you read and understand all of the precau-
tions, push [F-6•OK].
• [F-6•OK] appears only following the precautions.
• Push [F-7•CANCEL] to cancel the firmware updating.
o
Push [F-2•
Y
] or [F-3•
Z
] to select the firmware file,
then push [F-4•FIRM UP].
!0
Read the displayed precautions carefully.
!1
If you agree, push and hold [F-6•OK] for 1 sec. to
start the firmware update.
• Push [F-7•CANCEL] to cancel the firmware updating.
!2
While loading the firmware from the USB-Memory,
the dialog as at left is displayed.
EXIT/SET
/
∫
DIR/FILE
F-1
F-7
USB
CANCEL
FIRM UP
FIRM UP
F-6
OK
F-3
F-4
/
SET
/
/
/
F-2
√
∫
√
EXIT/SET
16
UPDATING THE FIRMWARE