Accessories and hardware, Specifications – Invacare Xterra Series User Manual

Page 4

Advertising
background image

Invacare Corporation
www.invacare.com

USA
One Invacare Way
Elyria, Ohio
44035-4190
(800) 333-6900

Canada
570 Matheson Blvd. E.,
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
(800) 668-5324

Invacare is a registered
trademark and Yes, you can.,
Xterra, GT, SureStep and
MKIV are trademarks of
Invacare Corporation.
Windows is a registered
trademark of Microsoft
Corp. Specifications are
subject to change without
notification.

© 2001
Invacare Corporation
Form No. 01-341

Accessories and Hardware

The GT is available with many options to customize the fit and function to your client’s needs.
These are just a few of those options in seating and rigging.

New low-profile cage rigging remains
permanently attached to the frame at an
85° angle. This option slides into the tele-tubes
of the ASBA seat and is retrofittable.

Available with a range of center pivot-style
riggings.

The GT is a great solution for your pediatric
needs, as it is available in junior seat frame
sizes as small as 14'' x 14''.

Specifications

Maximum speed

7.5 mph

Overall turning radius

*

< 20''

Dimensions

Overall base width

25''

Overall length

**

36.5''

With cage rigging

40''

Seat-to-floor height

at 0° tilt

at 3° tilt

Widths from 14'' to 18''

17.1''

18''

Widths from 19'' to 20''

17.75''

18.75''

Seat adjustability

Width (1'' increments)

14'' to 20''

Depth (1'' increments)

14'' to 20''

Back angle (5° increments)

80° to 115°

Drive wheels

Pneumatic (standard)

16'' x 3''

Foam-filled (optional)

16'' x 3''

Front casters

Semi-pneumatic

8'' x 2''

Rear casters

Semi-pneumatic

6'' x 2''

Seat selection

ASBA seat

Van seat

Semi or full recline

Grey cloth

Grey vinyl

Tan vinyl

Electronics

MKIV-RII 80-amp

standard

MKIV-A

optional

Batteries

***

22NF

Weight

User capacity

250 lb.

Shipping (without batteries)

179 lb.

Shipping (with batteries)

257 lb.

Warranty

Gear motor

18 months

Electronics

12 months

Frame components

3 years

Meets requirements of HCPCS K0011 code.

* Measured with 16'' seat depth and cage riggings.

** Measured from front head tube to trailing rear caster.

*** Not included. Sealed gel cell recommended.

Except upholstered material, padded material and tires/wheels.

Advertising