iLive IB109P - Manual (Page 5)

5
Docking an iPod
Step 1:
Turn the Adjustable Dial for iPod until the arrow on the dial is pointing to the listed iPod
model to be docked.
• iPod models and memory sizes that are not listed on the Dock Adjustment Dial can be
docked by manually adjusting the dial to the depth that fits the iPod best.
Step 2:
Connect the iPod to the iPod connector inside the Dock for iPod.
• When the unit is plugged in, using AC power, the docked iPod will charge. If the unit is
running on batteries, DC power, the docked iPod will not charge.
Playing an iPod
Step 1:
After docking an iPod, adjust the Power Switch to the On position.
Step 2:
Adjust the Source Switch (FM,AM,iPod,Aux In) to the iPod position.
Step 3:
Press the Play/Pause Button to begin playing the docked iPod.
Tuning the Radio
Step 1:
Adjust the Power Switch to the On position.
Step 2:
Adjust the Source Switch (FM,AM,iPod,Aux In) to the FM or AM position.
Step 3:
Turn the Tuning Dial to the desired station.
Step 4:
Extend the FM Antenna to improve FM radio reception.
• An AM antenna is built into the unit. Adjust the unit to improve AM radio reception.
Using the Auxiliary Input
Step 1:
Connect an MP3 player or other audio source to the Auxiliary Input.
• This requires a 3.5mm auxiliary input cable, not included.
Step 2:
Adjust the Power Switch to the On position.
Step 3:
Adjust the Source Switch (FM,AM,iPod,Aux In) to the Aux In position.
Step 4:
Audio played from the connected MP3 player or other audio source will now be heard
through the unit’s speakers.