iLive 0915-0820-09 - Manual (Page 4)

6 7
OPERATIONS
█ PLAYING AN IPOD
1. Dock an iPod onto the unit's Dock
Connector.
2. Press the Power Button to turn the unit
on.
3. Press the Source Button to switch to
iPod Mode.
4. Press the Play/Pause Button to begin
playing the docked iPod.
• Press the Skip/Tune Buttons to skip
between tracks on the docked iPod.
• Press and hold the Skip/Tune Buttons
to fast forward and rewind on the current
track.
• Press the Random Button on the remote
to play the current album or playlist in
random order.
• Press the Repeat Button on the remote
once to repeat the current track.
• Press the Repeat Button on the remote
twice to repeat an entire album or playlist.
• Press the iPod Select Button on the
remote to make selections on a docked
iPod.
This button works exactly like the select
button on an iPod.
• Press the Mem+/iPod Menu on the
remote to move back through the menus
on a docked iPod.
This button works exactly like the menu
button on an iPod.
• Press the Menu- and Menu+ Buttons to
move up and down in any menu on the
docked iPod.
█ DOCKING AN IPOD
1. Press the Power Button to turn the unit
on.
2. Press the Open/Close Button to open the
Motorized CD/iPod Door.
3. Dock an iPod onto the Dock Connector.
4. Press the Open/Close Button to close the
Motorized CD/iPod Door.
█ UN-DOCKING AN IPOD
1. Press the Power Button to turn the unit
on.
2. Press the Open/Close Button to open the
Motorized CD/iPod Door.
3. Press down the iPod Eject Button to the
left of the iPod inside the dock for iPod.
This will lean the iPod out of the dock,
making it easier to grab and remove.
OPERATIONS
█ PROGRAMMING A CD
Follow the Steps for Playing a CD.
1. Press the Stop Button to stop the CD
2. Press the Program Button on the
remote.
3. Press the Skip/Tune Buttons to select the
track you want to play first.
4. Press the Program Button on the remote,
to save the selected track as the first
programmed track.
5. Repeat steps 3 and 4 until the desired
tracks have been programmed.
Up to 20 tracks can be programmed at
one time.
█ PLAYING A CD
1. Press the Power Button to turn the unit
on.
2. Press the Open/Close Button to open the
Motorized CD/iPod Door.
3. Load a CD into the CD player.
4. Press the Open/Close Button to close the
Motorized CD/iPod Door.
5. Press the Source Button to switch the
unit to CD Mode. "CD" will appear on
the LCD Display, indicating that the unit
is in CD Mode.
6. Press the Play/Pause Button to begin
playing the loaded CD.
• Press the Skip/Tune Buttons to skip
between tracks on the loaded CD.
• Press and hold the Skip/Tune Buttons
to fast forward and rewind on the current
track.
• Press the Stop Button to stop a CD
during play.
• Press the Intro Button on the remote to
activate Intro Mode. When in Intro Mode,
the unit will play the first 10 seconds of a
track and then skip to the next track.
• Press the Random Button on the remote
to play the tracks of a loaded CD in
random order.
• Press the Repeat Button on the remote
once to repeat the current track.
• Press the Repeat Button on the remote
twice to repeat an entire album.