IBM INFOPRINT 1116 - Manual (Page 80)

Argecy Computer Corporation 248-324-1800
76
5 When the Error light and Press Button light blink, close the cover.
The special function menu is activated.
Restoring factory defaults
Sometimes resetting the printer to the original factory default settings solves formatting problems.
1 Enter the special function menu .
2 Press and release the operator panel button twice quickly (double-button press) until the
Toner Low light comes on and the two bottom lights blink.
3 Press the operator panel with a long button press (hold until all the lights come on) to reset the
printer to the original factory defaults.
Once the settings are returned to the factory default values, the printer returns to the Ready
state.