Insignia I-PD1020 - Manual (Page 12)

Adjusting the picture
1. Press MONITOR button to select brightness adjustment and press + or - buttons to select
the preferred brightness level.
2. Press MONITOR button again to select the color adjustment and press + or - buttons
until the preferred color is set.
3. Press MONITOR button again to select display mode and press + or - buttons to select
NORMAL/PS, NORMAL/LB, or FULL picture display mode.
Note:
During playback, a few bright or dark spots may appear on the TFT LCD. This is normal in
active matrix display technology.
Playing discs
1. Load a disc and press (PLAY) to play the disc.
2. Press (STOP) to stop playback.
3. Remove the disc and switch off the product.
Note:
Press (STOP) button twice to stop the playback of DVD discs.
Pausing discs
Press (PAUSE) button.
Playing picture CDs
Press (PAUSE) button to play a DVD picture disc. The player switches to step play mode. Each
time you press the (PAUSE) button, the disc advances one frame.
Playing music CDs
Press the (PAUSE) to pause playback. Press (PLAY) to resume playback.
- 12 -