Insignia I-PD1020 - Manual (Page 9)

Connecting to a TV using composite video (C)
1. Connect the mini plug to the VIDEO/AUDIO jacks on the product.
2. Connect the yellow RCA plug to the VIDEO IN jack on the TV.
3. Connect the red RCA plug to the AUDIO IN R jack on the TV.
4. Connect white RCA plug into the AUDIO IN L jack of the TV.
Connecting to a TV using component/progressive scan video (D)
1. Connect the Mini-plug of the component video cable to the COMPONENT
VIDEO/PROGRESSIVE SCAN OUT jack of the unit.
2. Connect the other three plugs to the corresponding component video or progressive scan
video input jacks of the TV.
Connecting to a TV and audio amplifier (E)
1. Connect the mini plug to the VIDEO/AUDIO jacks on the player.
2. Connect the yellow RCA plug into the VIDEO IN jack on the TV.
3. Connect the red RCA plug to the LINE IN R jack on the amplifier.
4. Connect the white RCA plug into the LINE IN L jack on the amplifier.
If your amplifier accepts a coaxial digital input, you can connect the DVD player to the amplifier
with a coaxial cable (not supplied with product).
Note
: When the product is connected to a TV, the slide switch must be set to "VIDEO" position.
- 9 -