Invacare Basic Tilt - Manual (Page 38)

A.B.S. Curved Back Assembly
Basic Tilt & Tilt Only
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.
This will allow the Loop Fastener Adhesive on the Back Cover to attach properly.
Material
Back
Width x Height
Overall
Back Height
Item #4
1" Back Pan
Item #5
Back Foam
Item #6
Back Assembly
Cover
Item #7
w/ Fixed
Hardware
1073106 0010921 1073073 1073066 23"-25"H 14" x 20"
1073107 0011121 1073086 1073067-NLA 23"-25"H 15" x 20"
1072800 0011321 0009820 0125319-NLA 23"-25"H 16" x 20"
1072801 0011521 0010020 0125419-NLA 23"-25"H 17" x 20"
1072802 0011721 0010220 0125519 23"-25"H 18" x 20"
1072803 0011921 0010420 0125619 23"-25"H 19" x 20"
1072804 0012121 0010620 0125719 23"-25"H 20" x 20"
1073108 0304221 1073087-NLA 0125819 23"-25"H 21" x 20"
1073109 0158721 1073088 0125919-NLA 23"-25"H 22" x 20"
Special Special Special Special 23"-25"H 23" x 20"
Special Special Special Special 23"-25"H 24" x 20"
NOTE: Some foam size part numbers can accommodate two width and two back heights by turning the foam around 90 degrees. Example
would be a (16" W x 20" H) can be (20" W x 16" H) in other applications.
37
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 96-194