T.r.c.m. upgrade kit w/ mercury free switches, Tilt only or tilt/recline & recline only – Invacare Basic Tilt User Manual

Page 95

Advertising
background image

T.R.C.M. Upgrade Kit w/ Mercury Free Switches

Tilt Only or Tilt/Recline & Recline Only

As of 7/1/2009, switches are mercury free.

A - To fully utilize the T.R.C.M. upgrade kit, it is required to have a MKIV controller part number (1105707) with 2.15 version

software or higher. "Through the joystick operation" is not available for 2.0 through 2.14 version software.

A1 - Call technical service at 1-800-832-4707 for assistance on upgrading controller. Software version can be verified by using

a remote programmer part number (1109091).

A2 - MKIV controller part numbers (1061958) and (1086240) were replaced with MKIV controller part number (1105707) and

is applicable to use with all T.R.C.M. upgrade kits.

B - Not shown.
C - Include items 1-17 and all items below
D - Includes items 7-12
E - Before 4/07/06 and includes items 7-9, 13 and 14
F - After 5/23/04 the Egg Reset Switch became available as a service part and can be used as a direct replacement for the

tape reset switch part # 1020818.

G - After 4/06/06. Includes items 13-16

NOTE:

94

To order call toll free 1-800-333-6900, or www.invacare.com

Form No. 96-194

Advertising