IBM Infoprint ColourInfoPrint Colour 1767 - Manual (Page 9)

Supply and maintenance items
Separator roll assembly 6 Up to 40,000-pages (or when the paper fails to feed properly from ADF)
Pick up assembly 6 Up to 120,000-pages (or when the paper double-feeds through the ADF)
Warranty North America:
– One year, 9 A.M. to 5 P.M. next-day Depot Exchange (upgrades are available). For more information, visit
infoprint.com/support/warranties
Europe, Middle East, Africa:
– One year unless country law dictates otherwise), Courier Exchange (upgrades are available). Not available in all
locations. Contact your local InfoPrint Solutions Company representative for availability
Asia Pacific:
– One year, 9 A.M. to 5 P.M. next-day on-site repair (upgrades may be available). For more information, visit
infoprint.com/support/warranties
M40 MFP OPTION AT A GLANCE
When the M40 MFP Option is attached to the InfoPrint Colour 1764, the printer specifications for that particular printer will apply. For example, the
maximum speed of the InfoPrint Colour 1764 printer with the M40 MFP Option installed will be up to 35 ppm 1 colour or 40 ppm 1 monochrome letter
(33 ppm 1 colour or 38 ppm 1 monochrome A4). Please see the specific printer data sheet specifications.
What’s in the box 4896-311
– M40 MFP Option
– RJ-11 Phone Cable (if applicable)
– RJ-11 Phone Adapter (Country Specific) (if applicable)
– PCI Card
– Firmware Card
– 512 MB Memory (bringing printer total memory to 768 MB)
– Printer Op Panel Cover
– Setup Guide (Hardcopy)
– Software and Documentation CD
– WEEE Booklet (Country dependent)
– AC Power Cord
– DC/PCI Cable
– Spare Separator Pad
MFP Furniture – Scanner Stand
– Scanner Shelf
– 6-Metre Scanner Cable
Note: Printer memory options, flash memory or applications solution cards such as IPDS feature, Barcode fonts or decryption cards may not be compatible with the
M40 MFP Option. Please consult your InfoPrint Solutions Company representative.
Note: If finishing options are added to the InfoPrint Colour 1764 printer, the M40 MFP Option will be placed to the side of the printer.