Installing the faucet - h990 – InSinkErator H770 User Manual
Page 8
Property Damage: Do not pinch or break copper
tubing. Do not distort the last 1 inch of tubing.
Make sure to use rubber gasket
to ensure proper seal.
2
B
A
■
■
Unpack dispenser components.
■
■
On a firm, flat surface, carefully
straighten the copper tubing using
hands only.
■
■
Ensure that the black rubber gasket
is properly seated into the base of
the dispenser head and will
surround the sink mount.
■
■
Feed tubes down the hole in the
sink or countertop until the base is
at rest on the sink or countertop
surface.
■
■
From under the sink, place the
semi-circular mounting plate onto the
threaded stud.
■
■
Place wing nut onto the threaded
stud. Make sure faucet head is at the
desired angle. Tighten the wing nut
until snug, while ensuring the semi-
circular mounting plate extends
beyond the sink hole.
An assistant may be needed to hold
the dispenser head in place
while securing the dispenser.
C
H990
H990
H990
8
INSTALLING THE FAUCET - H990