InFocus X1 User Manual
Page 12
12
Using the projector with Windows 98 for the first
time
The first time you connect a computer running Windows 98 to the projector,
the computer recognizes the projector as “new hardware” and the Add
New Hardware Wizard appears. Follow these instructions to use the Wiz-
ard to load the correct driver (which was installed with your Windows
operating system).
If you are running Windows 2000 or Windows ME, skip these steps and go
to “Adjusting the image” on page 11.
a
Click Next to begin searching for the driver.
b
Make sure “Search for the best driver” is selected, then click Next.
c
Uncheck any checked boxes, then click Next. Windows automatically
locates the driver. If this driver has been removed, reload the driver using
your Windows operating system CD.
d
When Windows finds the driver, you are ready to install it. Click Next.
a
b
c
d