InFocus X1 User Manual
Page 3
3
Table of Contents
Introduction 4
Positioning the projector
5
Projector and Device Connector Guide
6
Computer connections
6
Video connections
6
Connecting a computer source
9
Required computer connections
9
Optional computer connections
9
Displaying a computer source image
10
Adjusting the image
11
Using the projector with Windows 98 for the first time
12
Connecting a video device
14
Video device connections
15
Composite video connection
15
S-video connection
15
Component video connection
16
VGA connection
16
Displaying video
17
Adjusting the image
17
Shutting down the projector
19
Troubleshooting your setup
19
Using the remote control
27
Using the audio
28
Using the keypad buttons
28
Optimizing computer images
29
Presentation features
29
Optimizing video images
30
Customizing the projector
30
Using the menus
31
Picture menu
32
Settings menu
35
Maintenance 38
Cleaning the Lens
38
Replacing the Projection Lamp
38
Cleaning the Lamp Housing Screens
40
Using the security lock
40
Appendix 41
Specifications 41
Accessories 41
Projected image size
43
Red LED Behavior and Projector Errors
43
If you are experienced in setting up projection systems, use the Quick Setup
card that was included. For complete details on connecting and operating
the projector, refer to this User’s Guide. Electronic versions of this User’s
Guide in multiple languages are available on the included CD and on our
website at www.infocus.com/service.
The website also has technical specifications (an interactive image size cal-
culator, laptop activation commands, connector pin outs, a glossary, the
product data sheet), a web store to buy accessories, and a page for online
registration.
Important Operating Considerations
Do not place the projector on a tablecloth or other soft coverings that may
block the front or back vents. Do not use a non-approved ceiling mount. In
the unlikely event of the bulb rupturing, thoroughly clean the area in front
of the projector and discard any edible items that may have been placed in
that area.
Do not place objects in
this area in front
2 ft (
.6m)
of the projector