Intel KEMX-2030 - Manual (Page 52)

Chapter 5
52 KEMX-2030 User’s Manual
Chapter 5
Driver Installation
If your KEMX-2030 does not come with an operating system pre-installed, you will
need to install an operating system and the necessary drivers to operate it. After you
have finished assembling your system and connected the appropriate power source,
power it up using the power supply and install the desired operating system.
You can download the drivers for the KEMX-2030 from the Quanmax website
at
www.quanmax.com and install as instructed there. For other operating systems,
please contact Quanmax.
NOTE
When the system reboots without connecting the CRT, there might be no
image on screen when you insert the CRT/VGA cable. Please
pressing <Ctrl>+<Alt>+<F1> simultaneously to show the image on screen.