Invacare 9000 - Manual (Page 21)

21
REMOVING/INSTALLING STEERING
LINK (FIGURE 3)
Removing
1. Remove the locknut and washer securing the rod
end of the steering link to the bracket at the bottom
of the drive arm assembly.
2. Remove the rod end from the drive arm assembly.
Installing
1. Install the NEW rod end into the bracket at the bot-
tom of the drive arm assembly.
2. Secure the new rod end to the drive arm assembly
bracket with the washer and locknut. Tighten securely.
Rod End
Drive Arm
Assembly
Bracket
Washer
Locknut
Drive
Arm
Assembly
Steering Link
FIGURE 3 - REMOVING/INSTALLING STEERING LINK
S
T
E
E
R
I
N
G
L
I
N
K
STEERING LINK PROCEDURE 6