Connecting a tv or projector, Connecting your components —continued – Integra DTR-5.9 User Manual
Page 24
24
Connecting Your Components
—Continued
• With connection
, you can listen to and record audio from your TV or listen in Zone 2.
• To enjoy Dolby Digital and DTS, use connection
or
. (To record or listen in Zone 2 as well, use
and
,
or
and .)
If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite
receiver to the AV receiver and use its tuner to listen to TV programs through the AV receiver (see
pages 27 and 29).
Connecting a TV or Projector
The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the
composite video or S-Video MONITOR OUT, or the COMPONENT VIDEO OUT, use the DTR-5.9’s display when
changing settings.
Connection
AV receiver
Signal flow
TV
Picture quality
COMPONENT VIDEO OUT
⇒
Component video input
Best
MONITOR OUT S
⇒
S-Video input
Better
MONITOR OUT V
⇒
Composite video input
Standard
GAME/TV IN L/R
⇐
Analog audio L/R output
DIGITAL IN COAXIAL 2
⇐
Digital coaxial output
DIGITAL IN OPTICAL 1
⇐
Digital optical output
Step 1: Video Connection
Choose a video connection that matches your TV (
,
, or
), and then make the connection.
A B
C
Step 2: Audio Connection
Choose an audio connection that matches your TV (
,
, or
), and then make the connection.
a
b
c
a
b
c
a
b
a
c
A
B
C
a
b
c
ANTENNA
FM
75
Y
COAXIAL
OUT
P
B
COMPONENT VIDEO IN
P
R
S VIDEO
IN
AUDIO
OUT
VIDEO
IN
L
R
OPTICAL
OUT
b
c
A
B
C
B
a
C
TV, projector,
etc.
Connect one or the other
Connection
must be assigned
c
Hint!