Connecting integra/onkyo components, Connecting integra/onkyo, Components – Integra DTR-5.9 User Manual

Page 37: Connecting your components —continued

Advertising
background image

37

Connecting Your Components

—Continued

With

(Remote Interactive), you can use the following special functions:

Auto Power On/Standby

When you start playback on a component connected via

, if the AV receiver is on Standby, it will automatically turn

on and select that component as the input source. Similarly, when the AV receiver is set to Standby, all components
connected via

will also go on Standby.

Direct Change

When playback is started on a component connected via

, the AV receiver automatically selects that component as

the input source. If your DVD player is connected to the AV receiver’s DVD IN (multichannel input), you’ll need to
press the [Multi CH] button repeatedly and select Multich to hear all channels (see page 48), as the Direct Change

function selects the DVD IN FRONT L/R jacks.

Remote Control

You can use the AV receiver’s remote controller to control your other

-capable Integra/Onkyo components. You must

enter the appropriate remote control code first (see page 101). And remember to point the remote controller at the AV
receiver and not the other component.

Notes:

• Use only

cables for

connections.

cables

are supplied with Integra/Onkyo players (DVD, CD,
etc.).

• Some components have two

jacks. You can con-

nect either one to the AV receiver. The other jack is
for connecting additional

-capable components.

• Connect only Integra/Onkyo components to

jacks. Connecting other manufacturer’s components
may cause a malfunction.

• Some components may not support all

functions.

Refer to the manuals supplied with your other Inte-
gra/Onkyo components.

• While Zone 2 is on, the Auto Power On/Standby and

Direct Change

functions do not work.

Connecting Integra/Onkyo

Components

Step 1: Make sure that each Integra/Onkyo component is connected to the AV receiver with an analog audio cable

(RCA).

Step 2: Make the necessary

connections (see illustration below).

Step 3: If you’re using an MD, CDR, or RI DOCK component, change the Input Display (see page 46).

ANTENNA

FM

AM

75

SIRIUS

L

R

FRONT

DVD

L

R

IN

CD

L

R

REMOTE

CONTROL

ANALOG

AUDIO OUT

L

R

ANALOG

AUDIO OUT

e.g., CD player

e.g., DVD player

Advertising