Recognize safety information, Items to note prior to installation, Average installation time – John Deere AUTOTRAC UNIVERSAL STEERING KIT PC20577 User Manual

Page 3

Advertising
background image

Installation Instructions

OUO6050,000128E

–19–08SEP05–1/1

Recognize Safety Information

T81389

–UN–07DEC88

This is a safety-alert symbol. When you see this symbol
on your machine or in this manual, be alert to potential for
personal injury.

Follow recommended precautions and safe operating
practices.

OUO6050,0001491

–19–18OCT05–1/1

Items to Note Prior to Installation

The following instructions are to be used only as a
supplement to the primary installation instructions
included with your AutoTrac Universal (ATU)
Steering kit.

For additional vehicle specific information, including
hardware and recommended vehicle settings, please
visit www.StellarSupport.com to view or print
additional platform specific information.

Several items are a part of the AutoTrac accuracy
equation. Please keep these external factors in mind
when installing components to provide the best
operating environment possible. (See AMS TALK
Bulletin # 043 and 048)

Be aware that system may not perform well if you
have excessive wear in the steering linkage and
joints.

Identification of worn and/or higher tolerance
steering components is vital for optimal performance

of the ATU kit. One method of checking wear, is to
turn the steering wheel and observe the movement
of the wheels. If the wheels don’t begin to turn when
the steering wheel is turned you may not achieve
optimal performance. Compare results with those of
a new vehicle of a similar model.

Please refer to installation instructions included with
the GreenStar wiring harness and AutoTrac
Universal Steering kit for component location and
installation.

Tighten all hardware that is installed to
manufacturer’s specifications.

IMPORTANT: AutoTrac Universal is to be installed

on approved platforms only. For a
complete list of approved platforms
please go to
www.stellarsupport.com.

OUO6050,000128F

–19–08SEP05–1/1

Average Installation Time

Approximate time needed for installing AutoTrac
Universal steering kit is less than 60 minutes. Total
amount of time needed may be greater if installing
GreenStar wiring harness and StarFire receiver
mounting brackets.

For quicker installation, obtain AutoTrac Universal
activation code before proceeding to vehicle. (See
section on Activating AutoTrac Universal.)

PC20577 (22MAR06)

1

Installation Instructions

032206

PN=3

Advertising