Jura Capresso IMPRESSA Z5 - Manual (Page 18)

18
Ⅲ Switch the IMPRESSA off with the ON / OFF switch
(A).
Ⅲ
GOODBYE
Ⅲ
Ⅲ The coffee spout is rinsing.
Ⅲ
RINSE LEFT SPOUT
Ⅲ PRESS BUTTON
Ⅲ Press the maintenance key
(C) to continue rinsing.
Ⅲ
GOODBYE
Ⅲ
When switching the machine off, there may be a hissing
sound. This is due to a normal process being performed by
the system.
It is recommended to switch off the machine with the power
switch if you intend not to use your IMPRESSA for a longer
time.
14. Settings
14.1 Setting the amount of water for coffee,
espresso (1 and 2 cups) and special coffee
The system’s basic settings include pre-defined amounts of water
(coffee 130 ml, espresso 60 ml, 2 coffees 260 ml, 2 espressos
120 ml, special coffee 145 ml). However, these can be modified as
required.
Ⅲ
COFFEE READY
Ⅲ
Ⅲ Place a cup under the respective coffee spout (17).
Ⅲ Press the product key to be programmed and hold it down until
the following message appears:
Ⅲ
1 COFFEE (example)
Ⅲ NORMAL (example)
Ⅲ The coffee will be brewed. Keep on holding the key down until
the following message is displayed:
Ⅲ
ENOUGH ?
Ⅲ PRESS BUTTON
Ⅲ When you have made as much coffee as you wanted, briefly
press the key once more.
Ⅲ CONFIRMED
Ⅲ √
Ⅲ The amount of coffee made has now been programmed for the
selected type of coffee.
Ⅲ
COFFEE READY
Ⅲ
14.2 Cappuccino setting
The system’s basic settings include pre-defined amounts of water
(100 ml) and milk (15 sec.). However, these amounts can be
modified as required.
Ⅲ
COFFEE READY
Ⅲ
Ⅲ Place a cup under the cappuccino nozzle (4).
Ⅲ Press the Cappuccino key
and hold it down until the follow-
ing message appears:
Ⅲ CAPPUCCINO
Ⅲ
NORMAL (example)
Ⅲ The cappuccino will be brewed. Keep on holding the key
down until the following message is displayed:
Ⅲ
ENOUGH MILK
Ⅲ
PRESS BUTTON