Jura Capresso IMPRESSA Z5 - Manual (Page 34)

34
Once started, the decalcifying program must not be inter-
rupted.
Always wait until the decalcifying agent has been used up
and the tank is empty. Never fill in additional descaling
agent.
Ⅲ
COFFEE READY
Ⅲ
DESCALE
Ⅲ Press the maintenance key
(C).
Ⅲ
TRAY / GROUNDS
Ⅲ EMPTY
Ⅲ Empty the drip tray (1) and the coffee grounds tray with the
container (3).
Ⅲ
TRAY
Ⅲ
MISSING
Ⅲ Place the empty, clean drip tray (1) and the coffee grounds tray
with the container (3) back into the IMPRESSA Z5.
Ⅲ SOLVENT IN TANK
Ⅲ
PRESS BUTTON
Ⅲ Remove the water tank from the machine. Empty out any
remaining water.
Completely dissolve the content of one blister (3 tablets) in a
receptacle containing 0.6 litres of water, and pour the mixture into
the water tank. Place the water tank back into the machine.
Ⅲ
SOLVENT IN TANK
Ⅲ PRESS BUTTON
Ⅲ Remove the cappuccino nozzle (4) from the machine (Fig. 14).
Ⅲ Place a receptacle each under the height-adjustable hot water
spout (12) and under the connecting parts of the nozzle (use tall
receptacle). Press the maintenance key
(C).
Ⅲ
MACHINE IS DECALCIFYING
Ⅲ
Ⅲ You will hear an acoustic signal.
Ⅲ
TRAY / GROUNDS
Ⅲ
EMPTY
Ⅲ Empty the drip tray (1) and the coffee grounds tray with the con-
tainer (3).
Ⅲ TRAY
Ⅲ
MISSING
Ⅲ Place the empty, clean drip tray (1) and the coffee grounds tray
with the container (3) back into the IMPRESSA.
Ⅲ
WATER TANK
Ⅲ
FILL
Thouroughly rinse out the water tank and fill it with fresh
cold tap water. Then place it back into the IMPRESSA.
Ⅲ
Ⅲ
PRESS BUTTON
Ⅲ Re-assemble the cappuccino nozzle.
Ⅲ Place a cup each under the height-adjustable hot water spout (12)
and the cappuccino nozzle (4), and press the maintenance key
(C).
Ⅲ MACHINE IS DECALCIFYING
Ⅲ
Ⅲ
UNIT IS HEATING
Ⅲ
Ⅲ After the machine has heated up, it will automatically perform a
rinsing cycle.
Ⅲ RINSING
Ⅲ