Janome MEMORY CRAFT 4900 QC - Manual (Page 9)

7
Foot control
Speed control slider
Sewing speed can be varied according to your sewing needs
with the speed control slider.
q To increase sewing speed, slide it to the right.
w To decrease sewing speed, slide it to the left.
Sewing speed is varied by the foot control.
The harder you press down on the foot control, the faster the
machine runs.
The machine runs at the maximum speed set by the speed
control slider when the foot control is fully depressed.
Operating Instructions:
The symbol “O” on a switch indicates the "off" position of a
switch.
For appliances with a polarized plug (one blade wider than
the other): To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If it does
not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper
outlet. Do not modify the plug in any way.
* Foot control model 21371 is used with sewing machine
model MC 4900.
q w