JVC AV-P960E - Manual (Page 7)

E-7
English
SD CARD SYSTEM
7 ~ 0 are functional only if SD card is inserted into the SD
Slot.
7 [IMAGE SELECT/ENTER] Button for
Selecting Images
Displays the miniature images of the SD card in a view of
16.
☞ Page 20 ‘Viewing Image Data Stored in SD Card’
8 [SAVE] Button for Saving SD Card
While selecting images from the camera, if this button is
pressed and hold, the indicator lamp will blink and the im-
age currently displayed will be stored in the SD card.
☞ Page 19 ‘Storing Images in SD Card’
9 [PAGE] Buttons
To select and display images stored in the SD card.
[
] : To view the previous image.
[ ] : To view the next image.
0 [DELETE] Button for Deleting SD Card
To delete selected images stored in the SD card.
When the [SD CARD] has been selected by the [SOURCE
SELECT] button 5, pressing this button for more than 2
seconds, the indicator lamp will blink and the selected im-
age will be deleted.
☞ Page 19 ‘Deleting images’
! [PICTURE MEMORY] Buttons
To store the output image in the internal picture memory
or to select and display the images stored in the picture
memory.
[1] ~ [3]
: Press the button for more than 2 seconds,
the button indicator lamp # will blink and the
image will be stored in the picture memory.
Press this button to output the stored image.
[CAMERA] : To select the camera image.
☞ Page 16 ‘Saving Images in the Picture Memory’
@ [USER SETUP] Buttons for Setting
Registration
To perform settings related to value setting.
[SAVE]
: The present user settings will be regis-
tered.
[USER SETUP] : The registered settings will be activated.
[DEFAULT]
: Setting reverts back to default (factory)
setting.
☞ Page 18 ‘Saving the settings (User Setting Registra-
tion)’
# Button Indicator Lamps
Indicator lamps will blink when button ! ~ * has been
operated and the various settings are in the process of
being changed.
$ [WHITE BALANCE] Adjustment Buttons
To perform settings related to white balance.
[AUTO]
: If this button is pressed, the indicator lamp
will blink while the white balance is being re-
adjusted.
[RED ] : Increase the red component of the entire
screen.
[RED ] : Decrease the red component of the entire
screen.
[BLUE ] : Increase the blue component of the entire
screen.
[BLUE ] : Decrease the blue component of the entire
screen.
☞ Page 17 ‘Adjusting White Balance’
% [NEGA/POSI] Button for Switching
between Negative/Positive Film
Set to Nega when viewing negative films.
Negative will be selected when the button is pressed.
Press the button again, positive will be selected.
☞ Page 15 ‘Presenting Films and Other Transparent Ma-
terials’
^ [BW/COLOUR] Button for Switching
between Black & White and Colour
To switch the output image between Black & White and
Colour display.
Black & White image will be selected when the button is
pressed. Press the button again, Colour image will be se-
lected.
& [TEXT] Button
To make the character clearer and sharper.
Text mode will be activated when the button is pressed. To
deactivate, press the button again.
* [IMAGE OFF] Button to turn off image
Use this button to hide the output image temporarily such
as before the presentation.
When this button is pressed, the screen will switch to im-
age off mode (black screen) and the lamp at the SOURCE
SELECT section selected as output will blink. When the
IMAGE OFF button or either one of the buttons at the
SOURCE SELECT section is pressed again, the mode will
be canceled and the selected image will be displayed.