JVC HR-J250E - Manual (Page 17)

EN
17
ENTER CHANNEL POSITION
5
Press TV PROG +/–.
RETURN TO NORMAL
SCREEN
6
After confirming all information is correct, press PROG
or OK. "PROGRAM COMPLETED" appears on the
screen for about 5 seconds, then normal screen
appears.
● Repeat steps 1 – 6 for each additional programme.
ENGAGE RECORDER’S
TIMER MODE
7
Press ‰ or TIMER. The recorder turns off automatically
and ‰ appears on the display panel.
● To disengage the timer, press ‰ or TIMER again.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 1 through 6, press WEEKLY (NUMBER
key “9”) for weekly serials or DAILY (NUMBER key “8”) for
daily serials (Monday – Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.
– P1 –
START STOP
21:00 = 22:00
DATE TV PROG
25.12 1
[+/–] =
[PROG] : EXIT
NOTE:
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen and "FULL" appears
on the front display panel. To record the extra programme, you
must first cancel any unnecessary programmes (
੬
pg. 18).
1 2 3
4 5 6
7 8 9
0
2
4
1
3
?
OK
WEEKLY
DAILY
TV PROG+/–
PROG
TIMER