Set the tape speed. (hr-j480eu only), Set the vps/pdc mode, Return to the normal screen – JVC HR-J280 User Manual
Page 23: Engage the recorder’s timer mode, Attention
Filename [HRJ480EU2.fm]
Masterpage:Right
EN
23
D
Set the tape speed. (HR-J480EU only)
Press SP/LP (
p
).
E
Set the VPS/PDC mode.
Press VPS/PDC to select “ON” or “OFF”.
● If “VPS/PDC ON” is displayed on the TV screen, VPS/PDC is
set to ON.
● If “VPS/PDC OFF” is displayed on the TV screen, VPS/PDC is
set to OFF.
੬
“VPS/PDC Recording” on page 25.
F
Return to the normal screen.
Press PROG or OK. “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears. If “PROGRAM OVERLAPPED” appears
on the TV screen, see page 27.
● Repeat steps 1 –
6
for each additional programme.
G
Engage the recorder’s timer mode.
Press
#
(TIMER). The recorder turns off automatically and
#
appears on the front display panel.
● To disengage the timer mode, press
#
(TIMER) again.
NOTES:
● To Change The Stop Time . . .
. . . press STOP +/– after pressing OK in step 3. You can
compensate for anticipated programme schedule delays.
● To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
“9”) for weekly serials or DAILY (NUMBER key “8”) for daily
serials (Monday — Friday). Either “WEEKLY” or “DAILY”
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
● You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, “PROGRAM FULL” appears on the TV screen. To record
the extra programme, you must first cancel any unnecessary
programmes (
੬
pg. 26).
● It is not possible to timer-record a TV programme with a
S
HOW
V
IEW
number which starts with “0”.
ATTENTION
Guide Program Number Set
“GUIDE PROG SET” appears after performing step 3 if the
Guide Program number for the S
HOW
V
IEW
number you
entered has not been set.
● Press the NUMBER keys or
rt
to input the channel
position number on which your recorder receives that
station, then press OK or
e
to set the Guide Program
number. The S
HOW
V
IEW
Program screen appears.
(Example)
To timer-record a ZDF
programme with the
S
HOW
V
IEW
system.
* If your recorder receives ZDF on
the channel position 2, press OK
or
e
after entering “2”.
HRJ480EU2.fm Page 23 Friday, January 12, 2001 2:59 PM