JVC HR-J280 - Manual (Page 40)

Filename [HRJ480EU3.fm]
Masterpage:Left
40
EN SUBSIDIARY SETTINGS (cont.)
Manual Channel Set
Store channels that were not stored during Auto Set Up
(
੬
pg. 8), Preset Download (
੬
pg. 10) or Auto Channel Set
(
੬
pg. 38).
A
Access the Main Menu screen.
Press MENU.
B
Access the Confirmation screen.
Press rt to move the highlight bar (pointer) to
“MANUAL CH SET”, then press OK or e . The
Confirmation screen appears.
C
Select the channel position.
Press rt w e until an open
position in which you want to
store a channel begins blinking,
then press OK. The Manual
Channel Set screen appears.
D
Select the band.
E
Input the channel.
Press the NUMBER keys to input the channel number you
want to store.
● Input “0” before any single number entries.
● To input the registered station name (ID – ੬
pg. 43), press e
until “– – – –” (ID setting) begins blinking, then press
rt
.
● For fine tuning adjustment, press e until “+/–” begins blinking,
then press
rt
. While tuning, “+” or “–” appears.
● When storing a channel that sends scrambled broadcasts,
press e until “OFF” (Decoder setting) blinks, then press rt
to set “DECODER” to “ON” (“OFF” is the default setting).
● When “L-2 SELECT” is set to “A/V” or “SAT”, the “DECODER”
setting cannot be changed (
੬
pg. 37).
F
Enter new channel information.
Press OK and the Confirmation screen appears.
● Repeat steps 3 – 6 as necessary.
G
Close the Confirmation screen.
Press MENU.
● To change positions, see “Change Station Channel Position”
(
੬
pg. 41).
● If you wish to set station names other than the ones registered
in your recorder, see “Set Stations (B)” (
੬
pg. 42).
The blueback screen and the
programme currently being
broadcast by the selected
channel appear alternately for
8 seconds each.
(Example) To store in position 12.
Press rt to change the band
between CH (regular) and CC
(cable), then press
e .
ATTENTION
Guide Program numbers are not set when channels are
stored manually. If an attempt is made at timer programming
with the S
HOW V IEW system in this state, the “GUIDE PROG
SET” screen appears; set the Guide Program numbers on this
screen. (
੬
pg. 23, “ATTENTION — Guide Program Number
Set“)
Or perform “Guide Program Number Set” (
੬
pg. 33).
HRJ480EU3.fm Page 40 Friday, January 12, 2001 10:51 AM