JVC PD-Z35DV4 - Manual (Page 30)

PICTURE menu
29
ENGLISH
PD-Z42DV4/PD-Z35DV4 / LCT1665-001A / English
2 Press the 5 buttons to choose
MAIN or SUB
MAIN:
You can change the colour system of the
main-picture.
SUB:
You can change the colour system of the
sub-picture.
• Choose MAIN when a sub-picture is
not displayed.
3 Press the 6 buttons to choose
the appropriate colour system.
Then press the a button
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system
from the input signal.
• The AUTO function may not function
properly if you have poor signal quality.
If the picture is abnormal in the AUTO
function, choose another colour system
manually.
• COLOUR SYSTEM cannot be chosen
when you are watching the PC picture.
For colour system in your country or
region, refer to the table below:
„ 4:3 AUTO ASPECT
You can choose one of three ZOOM modes,
REGULAR, PANORAMIC or 14:9 ZOOM,
as the ZOOM mode for the normal picture
(4:3 aspect ratio).
1 Choose 4:3 AUTO ASPECT then
press the a button
2 Press the 6 buttons to choose a
ZOOM mode
Area Country or Region System
Asia,
Middle
East
Bahrain, Kuwait, Oman,
Qatar, United Arab Emirates,
Yemen, etc.
Indonesia, Malaysia,
Singapore, Thailand, India,
etc.
PAL
China, Vietnam, etc. PAL
Hong Kong, etc. PAL
Islamic Republic of Iran,
Lebanon, Saudi Arabia, etc.
SECAM
Philippines, Taiwan,
Myanmar, etc.
NTSC
Europe
Russia, etc. SECAM
Czech Republic, Poland, etc. PAL
Germany, Holland, Belgium,
etc.
PAL
UK, etc. PAL
Oceania Australia, New Zealand, etc. PAL
Africa
Republic of South Africa, etc. PAL
Nigeria, etc.
PAL
Egypt, Morocco, etc. SECAM
D0017
>>
OK
PANORAMIC
4:3 AUTO ASPECT
REGULAR
14:9 ZOOM
-EN
PD-Z42&35DV4_Eng.book Page 29 Saturday, May 15, 2004 9:46 AM