Connecting headphones, Tv output from the out terminal, Connecting speakers/amplifier – JVC PD-Z35DV4 User Manual

Page 44: Additional preparation

Advertising
background image

Additional preparation

43

ENGLISH

PD-Z42DV4/PD-Z35DV4 / LCT1665-001A / English

„

Connecting headphones

Connect the headphones with a stereo mini-

jack (3.5 mm diameter) to the headphone
socket at the TV rear panel.

• No sound comes from the TV speakers

when the headphones are connected.

„

TV output from the OUT terminal

The video/sound signal of a TV channel you
are viewing is always output from the OUT

terminal.

• Changing over a programme number (PR)

also changes over the TV output from the
OUT terminal.

• The component signals input from the

VIDEO-1 (COMPONENT) or VIDEO-3
(COMPONENT) terminal cannot be

output through the OUT terminal.

• Teletext programmes cannot be output.

„

Connecting speakers/amplifier

While referring to the audio equipment

connection diagram, connect the audio
equipment you want to the TV.
You can use external front speakers to listen
to the TV sound instead of the TV speakers.
Before connecting anything:

• Read the manuals provided with the

amplifier and speakers.

• Turn the TV and amplifier off.
• To prevent magnetism from the speakers

adversely effecting the TV screen, use
magnetic-shielded speakers for the front
speakers.

• Note that connecting cables are not

supplied.

• The output from the AUDIO OUT

terminal is not interrupted by headphone

connection to the TV. You cannot cut the
sound from the front speaker even if you
connect a headphone to the TV.

• Adjust the volume of the external

speakers with the amplifier.

• Connect the subwoofer which carried an

amplifier.

• The subwoofer is interlocked with the TV

volume.

• You cannot connect an amplifier and a

subwoofer at the same time.

„

Using the TV speaker as the

surround centre speaker

The TV speaker can be used as the centre
speaker when listening to Dolby Surround

sound.
Connect the AV amp centre speaker output
terminal and the TV CENTER CHANNEL

INPUT terminal.

When using the TV speaker as the surround

centre speaker, set the SOUND menu
“SPEAKER” setting to “CENTER” (see
page 31).

R

AUDIO

OUT

SUB WOOFER

OUT

L

Y

Cb/Pb

COMPONENT

Cr/Pr

-VIDEO

VIDEO

SUB WOOFER

OUT

L

R

Back of the TV

1

Amplifier

2

Front speakers (Magnetic-shielded type)

3

Subwoofer

CENTER CHANNEL

INPUT

L

R AUDIO

VIDEO

VIDE

IN

VIDE

IN

VIDEO-3

IN

Y

Cb/Pb

COMPONENT

Cr/Pr

CENTER CHANNEL

INPUT

L

R

Back of the TV

1

Amplifier

2

Front speakers (Magnetic-shielded type)

PD-Z42&35DV4_Eng.book Page 43 Saturday, May 15, 2004 9:46 AM

Advertising
This manual is related to the following products: