John Deere ET-3302-J - Manual (Page 5)

7-Inch Disc Grinder Operator's Manual 5
NEVER TOUCH MOVING PARTS
Never place your hands, fingers or other body parts
near the tool’s moving parts.
NEVER OPERATE WITHOUT ALL GUARDS IN
PLACE
Never operate this tool without all guards or safety
features in place and in proper working order. If
maintenance or servicing requires the removal of a
guard or safety feature, be sure to replace the guard or
safety feature before resuming operation of the tool.
ALWAYS WEAR EYE AND EAR PROTECTION
Protect yourself from flying or expelled wood chips,
metal particles or other debris by using protective
goggles or equivalent eye protector. Wear ear protector
to protect yourself from excessive noise.
PROTECT YOURSELF AGAINST ELECTRIC SHOCK
Prevent body contact with grounded surfaces such as
pipes, radiators, ranges and refrigeration enclosures.
Never operate the tool in damp or wet locations.
DISCONNECT TOOLS
Never leave the tool connected to a power source.
Always disconnect the tool from its power source
before servicing, inspecting, maintaining, cleaning and
before changing or checking any parts.
AVOID UNINTENTIONAL STARTING
Don’t carry the tool while it is connected to its power
source. Don’t carry the tool with your finger near the
power switch. Be sure the power switch is in the “off”
position before connecting the tool to its power source.
CONSIDER WORK AREA ENVIRONMENT
Don’t expose power tools to rain. Don’t use power tools
in damp or wet locations. Keep work area well lit and
well ventilated.
Don’t use tool in presence of flammable liquids or
gases.
Power tools produce sparks during operation. They
also spark when switching ON/OFF. Never use power
tools in sites containing lacquer, paint, benzine,
thinner, gasoline, gases, adhesive agents, and other
materials which are combustible or explosive.
KEEP CHILDREN AWAY
Do not let visitors contact tool or extension cord.
All visitors should be kept safely away from work area.
WARNING