John Deere ET-3302-J - Manual (Page 6)

6 7-Inch Disc Grinder Operator's Manual
DRESS PROPERLY
Do not wear loose clothing or jewelry. They can be caught in moving parts.
Rubber gloves and non-skid footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.
USE FACE, DUST MASK OR RESPIRATOR IF OPERATION IS DUSTY
All persons in the area where power tools are being operated should also wear face,
dust mask or respirator.
SECURE WORK
Use clamps or a vise to hold work. It’s safer than using your hand and it frees both
hands to operate tool.
DON’T OVERREACH
Keep proper footing and balance at all times.
STAY ALERT
Watch what you are doing. Use common sense. Do not operate tool when you are
tired.
Tools should never be used by you if you are under the influence of alcohol, drugs or
medication that makes you drowsy.
HANDLE TOOL CORRECTLY
Operate the tool according to the instructions provided herein. Do not drop or throw
the tool. Never allow the tool to be operated by children, individuals unfamiliar with its
operation or unauthorized personnel.
CHECK FOR LIVE WIRES
Avoid the risk of severe electrical shock by checking for live electrical wires that may
be buried in walls, floors or ceilings. The circuit to the wires should be disconnected
before work begins.
DO NOT USE POWER TOOLS IF THE PLASTIC HOUSING OR HANDLE IS
CRACKED
Cracks in the tool’s housing or handle can lead to electric shock. Such tools should
not be used until repaired.
BLADES AND ACCESSORIES MUST BE SECURELY MOUNTED TO THE TOOL
Prevent potential injuries to youself or others. Blades, cutting implements and
accessories which have been mounted to the tool should be secure and tight.
NEVER LEAVE TOOL RUNNING UNATTENDED
Turn power off. Don’t leave tool until it comes to a complete stop.
WARNING