JVC AV 27F702 - Manual (Page 20)

Remote Programming
20
DVD codes
The remote control is programmed with DVD codes for power on, power off, play, stop,
fast-forward, rewind, previous chapter, next chapter, tray open/close, and still/pause operation.
1) Find the DVD player brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
3) Press and hold down the D
ISPLAY button.
4) With the D ISPLAY button held down, enter the first code number listed with the 10 key pad.
5) Release the D ISPLAY button.
6) Confirm the operation of the DVD player.
• If your DVD player does not respond to the first code, try the others listed. If it does not respond
to any code, try the Search Codes Function, on page 50.
• After you program your remote, some DVD buttons may not work properly. If some buttons do not
work properly, use the remote control which came with your DVDplayer.
NEW F702/802 mini-IB 3/8/01 11:16 AM Page 20