Jensen KT2056 - Manual (Page 6)

5
To instal l the batt ery :
Open the battery com partment cov er on the
bottom of the radio by pressi ng the tab in
the directi on of the arr ow.
Connect the 9-vol t battery to the battery
clip. It can only be connected one way.
Push the battery into the battery
com partment and replace the cov er.
.
.
.
.
POWER FAILURE INDICATOR
If no battery is installed in the radio, or if the battery in the compartment is weak or
dead, the time and alarm settings will be lost if the power is interrupted. When the
AC power is restored the clock display will begin flashing. This indicates that
the time display is incorrect and needs to be reset.
IMPORTANT :
After you reset the time, be sure to reset your alarm settings as well.
.
O
P
E
N