Jensen KT2056 - Manual (Page 8)

7
OPERATING INSTRUCTIONS
SETTING THE CLOCK
When you connect the radio to your AC outlet for the first time, the clock display will
begin flashing "12:00" . The flashing will stop when you set the time.
1. Depress the TIME button and the HOUR button to set the correct Hour.
2. Depress the TIME button and the MIN button to set the correct Minute.
PM indicator
ALM indicator
NOTE : Be sure to observe the PM indicator to make sure that the time is set
correctly for AM or PM. If the PM indicator is 'On', the time displayed is
"PM". If the PM indicator is 'Off' , the time display is "AM".
SETTING THE WAKE UP TIMES
1. Depress the ALARM button and the HOUR button to set the correct wake
up Hour.
2. Depress the ALARM button and the MIN button to set the correct wake
up Minute.
NOTE : Be sure that you have set the wake up time correctly by observing the PM
indicator. If the PM indicator is 'On', the wake up time is "PM". If the PM
indicator is 'Off', the wake up time is "AM".
CHECKING THE WAKE UP TIMES
Whenever you want to check the wake up time, simply press ALARM button.
The display will change from the correct time to the wake up time. Release
the ALARM button to return to the correct time.
.