John Deere L2048 - Manual (Page 15)

Operating - 11
OPERATING
MX7691
A - Free-Wheeling Lever (Foot Control Models)
MX7696
A - Power Port (On models 2048 and 2548 Only)
Miscellaneous Accessories
MX7694
A - Front and Rear CargO Mount System™
MX10524
A - Glove Storage Pocket
Adjusting Seat
MX7698
1. Sit in seat.
2. Lift up on bracket (A).
3. Lean forward and slide seat forward or rearward to
desired position. Do not lean back on seat to push
rearward.
4. Release bracket to lock in position.
Adjusting Cutting Height
Cutting height can be adjusted from approximately 25–100
mm (1–4 in.). When mower deck is in transport position,
cutting height is approximately 100 mm (4 in.).
A
A
A
A
Mower Setting Approximate Cutting Height
1 25 mm (1 in.)
– 38 mm (1 1/2 in.)
2 50 mm (2 in.)
– 65 mm (2 1/2 in.)
A
A