John Deere L2048 - Manual (Page 29)

Operating - 25
OPERATING
MX10440; MX8868
2. Install mulch cover (C) onto mower deck (D). Mulch
cover lip (E) must be seated in mower deck groove.
3. Hook mulch cover to mower deck:
• 48 (3 in 1), wheel bracket grooves (F).
• 42 (3 in 1), slot (G) on left side and wheel bracket
hole (H).
4. Lower discharge chute and metal deflector.
5. Make sure the correct blades are installed for maximum
mulching operation.
Using the Power Port (Models 2048 and 2548
Only)
MX7696
An electric power port (A) can be used for accessories. See
your Authorized Service Center.
Using CargO Mount System™
MX7694
A - Front and Rear CargO Mount System™
The front and rear CargO Mount System™ brackets (A)
can be used for easy attachment of selected optional
equipment.
Use John Deere approved optional equipment only. See
your Authorized Service Center for approved optional
equipment.
c
CAUTION: Avoid injury! Safe operation requires
your full attention. Do not wear radio or music
headphones while operating machine.
E F
D
C
H
G
A
A
A