JVC HR-J278EU - Manual (Page 25)

Filename [HRJ278EU2.fm]
Masterpage:Right
EN
25
Edit To Or From
Another Video
Recorder You can use your recorder as the source player or as the
recording deck.
A
Make connections.
Connect the player’s 21-pin SCART connector to the
recorder’s 21-pin SCART connector as illustrated.
B
Set the input mode of recording deck.
With this video recorder, press AUX (NUMBER key “0”)
and/or PR on the remote control to select “L-1”. You can
select the input mode also by pressing
9 [PR], and then
5 [PR+] or 3 [PR–] on the recorder. See step 2 in
“Basic Recording” (
੬
pg. 16).
● When using another recorder as the recording deck, refer to its
instruction manual.
C
Set the edit mode.
See “PICTURE CONTROL” on page 27.
D
Start the source player.
Engage the Play mode of the source player.
E
Start the recording deck.
Engage the Record mode of the recording deck.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select “EDIT” to dub tapes in step 3, be sure to
select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.
● When you use this recorder as the source player for editing, be
sure to set “O.S.D.” to “OFF” before starting (
੬
pg. 27).
Video
channel
21-pin SCART cable
(not provided)
Recorder Your recorder
Another recorder
Player
TV receiver
RF cable
(provided)
A
B
Video
channel or
AV mode
21-pin SCART cable
(not provided)
Recorder
Your recorder
Another recorder
Player TV receiver
RF cable
(provided)
HRJ278EU2.fm Page 25 Monday, March 12, 2001 10:28 AM