JVC COMPACT VHS LYT0002-0N5A - Manual (Page 35)

EN
35
Random Assemble Editing [R.A.Edit]
Create edited videos easily using your camcorder as the
source player. You can select up to 8 “cuts” for automatic
editing, in any order you like. R.A.Edit is more easily
performed when the MBR (Multi-Brand Remote RM-
V704U or RM-V700U) is set to operate with your brand
of VCR (see VCR CODE LIST), but can also be performed
by operating the VCR manually.
MBR SET
VCR CTL
1 2 3
4 5 6
7 8 9 0
SET REMOTE/VCR CODE
Before operation, make sure the lithium battery is
installed in the remote control RM-V704U or RM-V700U
(
੬
pg. 38).
SET REMOTE TO OPERATE VCR
1 Turn off the power to the VCR and point the remote
toward the VCR’s infrared sensor. Then, referring to
the VCR CODE LIST on the left, press and hold MBR
SET, and press button (A) and then (B).
•The code is automatically set once you release the
MBR SET button, and the VCR’s power comes on.
OPERATE THE VCR
2 Make sure the VCR’s power is on. Then, while
holding VCR CTL, press the button on the remote for
the desired function. The functions the remote can
control are PLAY, STOP, PAUSE, FF, REW and VCR
REC STBY (you don’t need to press VCR CTL for this
one).
You’re now ready to try Random Assemble Editing.
IMPORTANT
Although the MBR is compatible with JVC VCRs and
those of many other makers, it may not work with yours
or may offer limited functions.
MAKE CONNECTIONS
CONNECT TO . . .
1
A JVC VCR EQUIPPED WITH REMOTE
PAUSE TERMINAL
Connect the editing cable to the Remote PAUSE
terminal.
B JVC VCR NOT EQUIPPED WITH REMOTE
PAUSE TERMINAL BUT EQUIPPED WITH
R.A. EDIT CONNECTOR
Connect the editing cable to the R.A.EDIT
connector.
C VCR OTHER THAN TYPE A OR B
Connect the editing cable to the RM-V704U/
V700U’s Pause-In jack.
All other connections are as shown in the illustration
on page 36.
CONTINUED ON NEXT PAGE
VCR CODE LIST
VCR BRAND
NAME BUTTONS
(A) (B)
AKAI 6 2
6 4
7 7
GRUNDIG 1 4
3 4
HITACHI 6 6
6 3
6 7
6 8
3 7
3 8
JVC A
B
C
MITSUBISHI
NEC
9 1
9 6
9 3
PANASONIC 1 3
1 7
1 1
9 4
1 8
FERGUSON 9 7
9 8
3 2
BLAUPUNKT 1 3
VCR BRAND
NAME BUTTONS
(A) (B)
PHILIPS 1 9
9 5
1 1
9 4
9 1
9 6
1 2
3 3
SANYO 3 6
3 5
SELECO, REX 9 1
9 6
TOSHIBA 6 9
6 1
6 5
6 `
3 9
3 1
SHARP
SONY
1 5
1 `
THOMSON,
TELEFUNKEN,
SABA,
NORDMENDE 9 1
9 6
9 7
3 2
NOTES:
● If the VCR’s power doesn’t come on in step 1,
try another code from the VCR CODE LIST.
● Some brands of VCR don’t come on automati-
cally. In this case, turn the power on manually
and try step 2.
● If the RM-V704U/V700U is not able to control
the VCR, use the controls on the VCR.
RM-V704U or RM-V700U (provided)