John Lewis JLDWS1208 - Manual (Page 21)

dishwasher door, the programme starts
automatically.
Once the washing programme has
started, a point-shaped optical signal
appears on the floor beneath the
dishwasher door.
This optical signal will remain
illuminated for all the duration of the
washing programme.
Setting and starting the
programme with delay
start
1. After having selected the washing
programme, press the delay start button
until the number of hours for the delay
start appear in the digital display. The start
of the selected washing programme can
be delayed for between 1 and 19 hours.
2. Close the dishwasher door, the
countdown starts automatically.
3. The countdown will decrease with steps
of 1 hour.
4. The opening of the door will interrupt the
countdown. Close the door; the
countdown will continue from the point at
which it was interrupted.
5. Once the delay start has elapsed the
programme will start automatically.
Cancelling a delay start or
a washing programme in
progress
• Simultaneously press and hold the two
programme buttons positioned over the
word Cancel, until all the programme
button lights come on.
• Cancelling a delay start involves also the
cancelling of the washing programme set. In
this case you have to set the washing
programme again.
• If a new washing programme is to be
selected, check that there is detergent in
the detergent dispenser.
Warning! Interrupt or cancel a
washing programme in progress
ONLY if it’s absolutely
necessary. Attention! Hot steam
may escape when the door is
opened. Open the door carefully.
Interrupt a washing
programme in progress
• Open the dishwasher door; the
programme will stop. Close the door; the
programme will start from the point at
which it was interrupted.
End of the washing
programme
• The dishwasher will automatically stop and
an audible signal informs you of the end of
the washing programme.
• When the washing programme has ended,
the optical signal on the floor beneath the
dishwasher door will turn off.
1. Open the dishwasher door.
The indicator light of the programme just
ended remains illuminated.
2. Switch off the dishwasher by pressing the
On/Off button.
3. Leave the dishwasher door ajar and wait
a few minutes before removing the dishes;
in this way they will be cooler and the
drying will be improved.
21