JVC 0706TKH-CR-MU - Manual (Page 13)

21
ENGLISH ENGLISH
22
Set Up
Set Up
Auto Program
Video-3 Setting
HDMI Setting
Video
Off
PC Position
Teletext Language
Edit/Manual
Video-1 Setting
AI Volume
Language Video
Video
1
2
3
4
5
Video-1
Video-2
Video-3
HDMI
PC
AV Select
0 01
Set Up
Video
Off Video
PC Position
Auto Program
Video-3 Setting
HDMI Setting Teletext Language
Edit/Manual
Video-1 Setting
AI Volume
Language
PC Position > >
Set Up
IMPORT
ANT!
PREP
ARE
USE
SETTINGS
TROUBLE?
Operate the connected device and play a video
Select the video source 1
Watching videos / DVDs
2
Display the menu bar
Select “Set Up”
1
2
1 select
2 next
Select “Video-1 Setting” or “Video-3 Setting”
1 select
Switch between video and component signal
2 watch
1 select
3
4 Change settings
2 set
1 select Video : For normal
video signal
Component : For component
video signal
 If both composite and S-VIDEO cables are connected, S-VIDEO will be enable.
Display the menu bar
Select “Set Up” Select “PC Position”
1 select
2 next
PC position adjustment
1
2
1 select
2 next
3
1 adjust
2 set
 Shown only when “PC” is selected.
 Reset position 
Using S-VIDEO
 Component and PC signals does not output from this terminal.
 When you are viewing video signal, no signal will output through the S-VIDEO terminal.
 HDMI inputs does not output from this terminal.
Using OUT terminal
Operate JVC VCRs and other devices
Turn on the device
DVD players
VCRs and DVD recorders
Select a channel (VCR mode)
Select a chapter (DVD mode)
Record / Display DVD top menu
Rewind / Playback / Fast-forward
Stop / Pause
1
 Some models of JVC devices cannot be operated with this remote control.
2
3
21-22 7/18/2006 11:17:41 AM