JVC 0706TKH-CR-MU - Manual (Page 18)

31
ENGLISH ENGLISH
32
When you have trouble
IMPORT
ANT!
PREP
ARE
USE
SETTINGS
TROUBLE?
Severe noise or
snow
Troubleshooting
Patterns, stripes
or noise
I can’t turn it on!
 Is the power cord connected to the AC outlet
correctly?
The remote
control doesn’t
work!
 Is the TV connected correctly to
the aerial?
 Change the direction of the aerial.
 Is the aerial or its cable
damaged?
 Consult your retailer
Ghosting
(Doubling of images)
 Are you receiving interference
from signals reflected off
mountains or buildings?
 Adjust the direction of your
aerial, or change to a
good-quality directional aerial
 Is the aerial receiving interference
from high-voltage power lines or
wireless transmitters?
 Consult your retailer
 Are connected devices too close
to the TV?
 Insert the minimum distance
between the aerial and the
cause of interference until no
interference
 Are the batteries flat?
 Are you more than 7 meters away
from the TV?
 Is the “MODE (VCR / TV / DVD)” set to “TV”?
 When viewing teletext, the TV menu bar does not appear.
 Depending on the stability of the signal, there may be a time
lag when changing channels.
Problem Actions page
 Unplug TV, several minutes later plug it in again.
Remote control
stops working
–
 Switch “Child Lock” to “Off”.
Front control buttons
does not work
28
 Unnatural colour >>> Adjust “Colour” and “Back Light”.
Check your “Colour System”. If “Auto”
is selected, select the specific colour
system manually.
Noise >>> Set to the following functions.
Picture Mode : Standard
Super DigiPure : Max
Dull picture >>> Set to the following functions.
Picture Mode : Bright
Super DigiPure : Min
Poor picture quality
28
30
28
30
28
30
 Switch “Blue Back” to “Off”.
Blue screen appears
on the screen
26
 If the top of the image is distorted, check the video signal
quality itself.
 If movement appears unnatural when receiving a signal from
a DVD player, etc. with 625p (progressive-scanning), change
the output setting of the external device to 625i (interlace-
scanning).
Strange picture
when using an external
device
–
–
Basics
Screen
Picture
 Press “ ” to return to your settings.
Aspect ratio changes
unintentionally
17
 Adjust the “PC position”.
PC screen alignment
is off
21
31-32 7/18/2006 11:18:11 AM