JVC 0397MKV*UN*YP - Manual (Page 36)

36
TROUBLESHOOTING
NOTE : External noise or disturbance may interfere with the microprocessors built into the
GV-DS1 JLIP Video Capture Docking Station. If this happens, turn the power off and
then turn it on again.
Problem
—
—
23
11 – 13
19
18
—
23
—
—
Page
No effect when clicking the
Input Select/Memory
buttons.
The video equipment image
is not displayed on the
connected TV.
The video unit does not
operate when "Window" —
"VCR" in the menu bar and
"VCR" in the "VCR" opera-
tion window are clicked.
Reverse Slow Play and
Forward Slow Play not
available in "VCR" operation
window.
The"VCR" operation
window display shows a
different operation from
what the video unit is
actually doing.
On-screen display of video
unit is stored in memory.
Counter display appears in
the image display box even
when there is no tape in the
video unit.
ⅷ The windows do not change during transfer
or compression of index image/full image data.
ⅷ The video is displayed on the LCD screen of
the attached GR-DVM1. It is not possible to
check the images on the computer.
ⅷ When video equipment is connected to the
CAPTURE EXT IN/PRINTER connector, its
video is displayed on the LCD screen of the
GR-DVM1.
ⅷ The counter display in the "VCR" operation
window turns blue.
ⅷ Is your video unit compatible with JLIP ?
Only JLIP-compatible units can be
operated.
If you are using a JLIP-compatible unit and
it still won’t work, check to make sure that
it is correctly connected.
ⅷ Is the video unit selected in "Select Unit" ?
Select correctly.
ⅷ Initialize JLIP.
ⅷ Make sure the video unit is turned on.
ⅷ These are available only when the video
unit has a Slow Play function.
ⅷ Slow Play in the VCR operation window
automatically switches to Play after
approximately 20 seconds.
ⅷ In some cases, the video unit may continue
slow-motion playback even when the
"VCR" operation window changes from
Slow Play to Play. Check your video unit’s
instruction manual for details.
ⅷ If your video unit has an onscreen display,
turn it off.
ⅷ When capture video data from a powered-
on video unit with no tape loaded, a
counter display may appear in the image
display box. Images corresponding to the
displayed counter number can no longer be
caputred.
Cause