Troubleshooting – JVC 0397MKV*UN*YP User Manual

Page 65

Advertising
background image

65

TROUBLESHOOTING

Error – – This application will
close.
Check devices – – Confirm
that power is ON.

No devices detected to
connect.
Power ON all devices in
system.

Communication error
(&H (number))
Check cable connection.

Select the device to control.

No video cassette!!
Load a video cassette to ID
(number).

Invalid entry in scene
(number) (There is IN

>

OUT

condition). Correct the time
or delete the scene.

Select a number between 0
and 29.

Invalid frame number on drop
frame counter.

ⅷ The COM port used for the JLIP connector is not

selected, or the COM port is selected but the
connection is wrong.

Ⅵ Check the connected COM port and select it on the

"Serial Port Selection" screen (

੬

pg. 46).

ⅷ Power is not supplied or the connection is wrong.

Ⅵ Connect the devices correctly and turn them on

(

੬

pg. 42, 43).

ⅷ Device is not turned on or cable is disconnected.

Ⅵ Connect the device correctly and turn it on

(

੬

pg. 42, 43).

Ⅵ If device was turned off and on again during

operation, click "OK". All devices should function
properly.

ⅷ The line where the name of the device to use

appears is not clicked.

Ⅵ Click on it and "OK" (

੬

pg. 47).

ⅷ The video cassette is not loaded in the camcorder.

When the video cassette is removed during
operation, this message appears.

Ⅵ Insert the video cassette into the camcorder.

ⅷ The value of the CUT OUT point is smaller than

the CUT IN point's.

Ⅵ Set the value of the CUT OUT point so that it is

larger than the CUT IN point's (

੬

pgs. 50, 54).

ⅷ When correcting the CUT IN/OUT points, the

value you set differs from the original by over 30
frames.

Ⅵ Select integral number from 0 to 29 (

੬

pg. 54).

ⅷ Because the DV-format digital camcorder uses the

drop frame system, inputting frame 00 and 01 is
impossible.

Ⅵ Input frame value other than 00 or 01

(

੬

pgs. 48, 54).

MESSAGE

ⅷ POSSIBLE CAUSE

Ⅵ CORRECTIVE ACTION

The monitor displays of the application software illustrated in this manual may differ from
those you are actually viewing depending on the operating environment of your computer.

Advertising