JVC AV-1414EE - Manual (Page 13)

13
Remote control buttons and functions
Channel Scan
You can search for the channel you
want to view while scanning all of the
channels that can be viewed on this
TV.
1.
Press CHANNEL SCAN.
Channels will be scanned in
channel No. order.
2.
When the channel that you
want to view appears, press
CHANNEL SCAN again
before scanning for the next
channel begins.
• Channel Scan selection cannot be
selected for channels to which the
Skip has been set to
YES. (See page
9.)
Return +
You can set a channel you frequently
view to the Return Channel and you
can view that channel at any time with
one-touch.
To set the channel to the Return
Channel:
1. Select the channel you want to
set to the Return Channel.
2. Press RETURN + and hold until
the message RETURN PLUS
PROGRAMMED! appears.
• When you turn off the TV, the Return
Channel setting is cancelled.
To view the Return Channel:
Press the RETURN + button.
• You can view two channels (current
channel and Return Channel) alternately
by pressing this button.
To cancel the Return Channel
setting:
Press the RETURN + button and hold
until the message
RETURN PLUS
CANCELLED! appears.
If no channel is set to the Return
Channel:
You can view the channel selected
right before the current channel by
pressing this button.