JVC AV-1414EE - Manual (Page 8)

8
■ Manual Channel Preset
You can manually preset the desired TV channels to the desired channels.
1. Press MENU / to display the MENU 3 menu,
then select MANUAL CH PRESET .
2.
Press MENU / or –/+.
The sub-menu is displayed.
• The channel No. is displayed as a PR No.
3.
Press MENU / or –/+ to select the
channel number.
4. Press VOLUME –/+ to start searching for
the TV channel.
or is displayed on the screen.
When a TV channel is received, the or display goes out, and the TV
station is preset to the currently selected channel No.
• If the TV channel you want to preset is not displayed, repeat step 4 until the TV finds the
TV channel you want to preset.
• To stop the Manual Channel Preset function, press any button other than the VOLUME
–/+ button.
If the picture is not clear:
Use the Fine function to fine-tune the TV station.
1. Press MENU / to select FINE.
2. Hold VOLUME –/+ down to fine-tune the TV station
so that the best image is displayed on screen.
or indicates that the TV station is being
fine-tuned.
5.
Press MENU / to select SOUND SYSTEM .
6. Press VOLUME –/+ to select the appropriate
sound system.
• For the sound systems in each country or region, refer to the
table “Broadcasting systems” on page 22.
7.
Press MENU / to select MANUAL .
8. Repeat steps 3 to 7 if you want to preset another TV station to a
channel.
9.
Press DISPLAY to turn the display off.
Preparation
MENU 3
AUTO CH PRESET
MANUAL CH PRESET
LANGUAGE ENGLISH
SELECT BY EXIT BY
OPERATE BY -+
DISPLAY
MANUAL
FINE
SKIP NO
SOUND SYSTEM B/G
EXIT
SELECT BY PR 1 VL
PROGRAM BY -+ EXIT BY
SEARCH BY VOL-+
DISPLAY
Channel
No.
MANUAL
FINE
SKIP NO
SOUND SYSTEM B/G
EXIT
SELECT BY PR 3 VL
PROGRAM BY -+ EXIT BY
FINE BY VOL-+
DISPLAY
MANUAL
FINE
SKIP NO
SOUND SYSTEM B/G
EXIT
SELECT BY PR 3 VL
PROGRAM BY -+ EXIT BY
CHANGE BY VOL-+
DISPLAY